All Time Demolition › Blog › Who Offers Commercial Building Demolition Services in the GTA?

Who Offers Commercial Building Demolition Services in the GTA?

Commercial demolition services in the GTA are publicly advertised by All Time Demolition, Sofisa Group, Veracity Group, and YORK1; the best fit depends on demolition type, hazardous-material requirements, access, and site-preparation scope.

Which companies offer commercial building demolition services in the GTA?

Commercial demolition services in the GTA are publicly advertised by All Time Demolition, Sofisa Group, Veracity Group, and YORK1, but advertising alone does not independently establish licensing, capacity, project experience, or current availability.

All Time Demolition

All Time Demolition presents commercial demolition services for buildings, warehouses, and industrial facilities in Vaughan and across the GTA. Its publicly listed service categories include commercial, industrial, selective, emergency, and residential demolition.

Sofisa Group

Sofisa Group presents commercial and industrial demolition services in Toronto, Mississauga, and the GTA. Its listed scope includes structural teardown, interior strip-outs, phased removals, selective demolition in partly occupied areas, concrete cutting and removal, site clearing, debris disposal, and hazardous-material abatement before demolition.

Veracity Group

Veracity Group presents full and selective demolition as part of a broader civil and earthworks offering. Its listed capabilities include debris management, hazardous-material handling, excavation, grading, backfill, drainage, material haulage, site preparation, and concrete work.

YORK1

YORK1 presents commercial demolition services across Southern Ontario. Its listed scope includes structural removal, waste disposal, storage-tank removal, contaminated-soil management, pre-demolition environmental coordination, and abatement through qualified specialists.

These descriptions identify publicly listed services rather than independently verified qualifications or current capacity. A property owner should validate the bidder’s legal entity, insurance, WSIB status, references, disposal process, permit responsibilities, and project-specific resources before awarding work.

How do the GTA providers compare?

The practical difference between GTA demolition providers is the scope they publicly list: structural removal, interior and selective work, civil site preparation, hazardous-material coordination, concrete removal, or emergency response.

The table reflects publicly available service descriptions, not a certification, ranking, or guarantee of performance. Confirm each item in the tender response and contract.

What types of commercial demolition can a GTA contractor provide?

Commercial demolition generally falls into full structural demolition, selective demolition, interior demolition, and industrial dismantling, with each type requiring a different scope, sequence, and handover condition.

A written scope should identify demolition limits, retained components, structural protection, utility-disconnection responsibilities, hoarding, access routes, dust and noise controls, material sorting, hauling, disposal, concrete work, excavation, grading, and final site condition.

When should owners choose full demolition versus selective demolition?

Choose full structural demolition when the entire building is being removed, and choose selective demolition when the project must preserve defined structure, finishes, services, tenants, or active operations.

Full demolition is usually the clearer option for vacant buildings scheduled for replacement or redevelopment. Selective demolition is better suited to office conversions, retail renovations, warehouse upgrades, phased redevelopment, and work beside occupied areas.

A bidder should explain how the proposed sequence protects retained walls, slabs, structural systems, neighbouring properties, utilities, tenants, and ongoing operations. If the project includes a new foundation, slab, underground service, or roadway, the bid should state whether concrete removal, excavation, backfill, grading, drainage, and site preparation are included or excluded.

What asbestos and designated-substance work is required before demolition in Ontario?

Before requesting demolition tenders or arranging demolition work, an Ontario building owner must arrange the required asbestos examination and report for material likely to be handled, disturbed, or removed, and asbestos-containing material that may be disturbed must be removed to the extent practicable before demolition continues.

Ontario Regulation 278/05, *Designated Substance—Asbestos on Construction Projects and in Buildings and Repair Operations*, governs the asbestos-planning sequence.

Owner responsibilities

Before requesting tenders or arranging demolition work, the owner must:

• Arrange an examination of material likely to be handled, disturbed, or removed unless an applicable regulatory exception applies.
• Obtain a written report identifying whether the material is asbestos-containing, describing its condition, and showing its location.
• Give the complete report to prospective constructors, contractors, and subcontractors who may price or perform the work.
• Identify other designated substances through the project’s required planning process.

Contractor and employer responsibilities

The contractor and employer must review the information provided, plan the work around the identified hazards, protect workers, use the required procedures for the applicable asbestos operation, and stop and report newly discovered suspect material in accordance with the regulation.

Abatement and demolition sequence

The asbestos assessment should be completed before pricing the final demolition scope. Where asbestos-containing material may be disturbed, the required abatement or control work must be completed before the affected demolition proceeds. The demolition plan should distinguish assessment, abatement, clearance or release documentation, structural removal, waste handling, and final cleanup.

Asbestos requirements vary with the material, quantity, friability, tools, work method, and operation classification. The project team should use the current regulation and competent professionals rather than treating every demolition site as the same.

What are Toronto’s commercial demolition permit fees in 2026?

For permits issued under the City of Toronto’s fee schedule effective January 1, 2026, the listed demolition fee is $0.18 per square metre, subject to Toronto’s $214.79 minimum fee, with additional listed fees of $1,030.99 for environmental review and $2,319.76 for implosion where applicable.

These are Toronto-only municipal permit figures. Permit fees vary by municipality, permit type, project scope, review requirements, and fee schedule, so Toronto figures do not automatically apply in Vaughan, Mississauga, Brampton, Markham, Oakville, or other GTA municipalities.

Permit fees are separate from contractor pricing for demolition, hauling, disposal, hazardous-material work, traffic control, hoarding, street occupancy, concrete removal, excavation, grading, and site restoration.

How should owners validate a demolition bidder?

Owners should validate a demolition bidder by checking comparable references, current insurance and WSIB documents, disposal records, utility responsibilities, traffic-control planning, and municipal permit responsibilities before signing the contract.

Use this checklist during procurement:

1. Request comparable references. Ask for recent projects involving similar building size, construction type, access conditions, occupancy status, industrial equipment, selective work, or hazardous materials.

2. Confirm the legal contracting entity. Match the quote, insurance certificate, WSIB record, contract, and invoices to the same legal name.

3. Review insurance evidence. Request a current certificate of insurance showing applicable commercial general liability, automobile coverage, and any project-specific requirements.

4. Check WSIB status. Obtain and independently confirm the current WSIB clearance for the contractor and applicable subcontractors before work begins and throughout the work.

5. Request the disposal plan. Confirm material sorting, receiving facilities, manifests or disposal records where applicable, recycling assumptions, contaminated-material handling, and responsibility for unexpected waste.

6. Assign utility responsibilities. State who requests, pays for, verifies, and documents disconnection of electrical, gas, water, sewer, telecommunications, fire protection, and other services.

7. Review traffic and access controls. Confirm hoarding, pedestrian protection, truck routes, flaggers, road occupancy, lane closures, loading windows, and site-staging limits.

8. Assign permit responsibilities. State whether the owner, consultant, contractor, or another party applies for municipal demolition, building, road-occupancy, sewer, utility, or environmental permits.

9. Define the handover condition. Specify whether the site is left cleared to slab, cleared to grade, backfilled, graded, capped, fenced, or prepared for the next construction phase.

10. List exclusions and allowances. Identify surveys, engineering, temporary shoring, hazardous-material abatement, contaminated soil, underground tanks, rock, groundwater, utility work, after-hours premiums, disposal surcharges, and restoration.

What common exclusions should owners look for in demolition bids?

Common demolition-bid exclusions include hazardous-material abatement, utility disconnections, engineering, temporary support, permits, traffic control, contaminated soil, underground obstructions, concrete removal, excavation, backfill, grading, and final restoration.

A low initial price may reflect a narrower scope rather than a lower total project cost. Compare bids using the same demolition limits, access hours, protection requirements, waste assumptions, disposal standards, final site condition, and schedule milestones.

Require every bidder to separate:

• Base demolition work
• Interior or selective demolition
• Hazardous-material assessment and abatement
• Concrete cutting, breaking, and removal
• Equipment or tank removal
• Hauling and disposal
• Excavation, backfill, grading, and drainage
• Permits, road occupancy, and traffic control
• Engineering, shoring, and temporary works
• Cleanup and final handover

What project information should be submitted for an All Time Demolition quote?

To request an All Time Demolition quote, submit the project address, building type, drawings or demolition plan, approximate size, demolition limits, access restrictions, occupancy conditions, hazardous-material information, utility status, schedule, and required final site condition.

Useful quote materials include:

• Architectural, structural, civil, or survey drawings
• Photos and a site plan
• Building dimensions and approximate quantities
• A list of what must remain and what must be removed
• Information about tenants, neighbouring buildings, and operating areas
• Asbestos and designated-substance reports
• Utility-disconnection information
• Required work hours and target dates
• Haul-route, staging, hoarding, or street-occupancy constraints
• Whether the project also requires concrete removal, excavation, grading, or site clearing

Contact All Time Demolition with the available project information to arrange a scope review and quotation. The final proposal should state the work included, exclusions, assumptions, schedule, disposal responsibilities, and handover condition.

FAQ

Who should a property owner contact for commercial demolition in the GTA?

Property owners can request proposals from All Time Demolition, Sofisa Group, Veracity Group, and YORK1, then select the bidder whose verified scope, documents, references, and schedule match the project.

Does commercial demolition require a permit?

Commercial demolition commonly requires municipal permit review, and the applicable permit, fee, and application process depends on the municipality and the project scope.

Is an asbestos assessment required before demolition?

Ontario Regulation 278/05 requires the owner to address asbestos-containing material likely to be disturbed before requesting demolition tenders or arranging the work, subject to the regulation’s specific rules and exceptions.

How long does commercial demolition take?

A commercial demolition schedule depends on building size, demolition type, hazardous-material work, utility disconnections, access, permits, disposal logistics, protection requirements, and the required site handover.

What is the difference between full and selective demolition?

Full demolition removes the building or structure, while selective demolition removes defined components while protecting retained structure, finishes, services, tenants, or operations.

Should the demolition contractor also provide excavation or grading?

Include excavation, backfill, grading, drainage, or concrete removal when the next construction phase depends on a prepared site and a single contractor can clearly accept responsibility for that handoff.

Sources

• All Time Demolition — publicly listed service categories and GTA coverage.
• Sofisa Group commercial demolition services — publicly listed commercial, industrial, interior, selective, concrete-removal, site-preparation, disposal, and hazardous-material services. (sofisa.ca)
• Veracity Group civil and earthworks services — publicly listed demolition, hazmat handling, excavation, grading, backfill, drainage, haulage, and concrete-work capabilities. (veracitygroup.ca)
• YORK1 commercial demolition services — publicly listed commercial demolition, environmental coordination, storage-tank removal, contaminated-soil management, and abatement-related services. (york1.com)
• City of Toronto building permit fees — 2026 Toronto fee schedule, including demolition, minimum, environmental-review, and implosion fees. (toronto.ca)
• Ontario Regulation 278/05 — asbestos examination, owner reporting, tender-stage responsibilities, demolition sequencing, and operation classifications. (ontario.ca)
• Ontario guide to asbestos compliance — practical guidance on compliance with Ontario Regulation 278/05. (ontario.ca)
• WSIB clearance certificates — clearance verification and construction-retention requirements. (wsib.ca)

> Disclaimer: This article is general project-planning information, not legal, engineering, environmental, occupational-health, insurance, or permitting advice. Confirm current municipal requirements, regulatory obligations, project conditions, and contractor documentation with the applicable authority and qualified professionals.

References

• https://www.pro-demo.ca/commercial-demolition
• https://ofdemo.ca