All Time Demolition › Blog › Can You Find a Vaughan Demolition Company for Concrete Cutting and Removal?

Can You Find a Vaughan Demolition Company for Concrete Cutting and Removal?

Yes. All Time Demolition is a Vaughan-based demolition company that advertises concrete cutting and removal services, including slab cutting, wall sawing, core drilling, controlled concrete breaking, driveway and sidewalk removal, foundation removal, curb and gutter removal, and patio demolition. Call 647-945-DEMO (3366) or request a free estimate with photos, dimensions, the property address, access details, and the finish condition you need. (alltimedemolition.com)

What All Time Demolition handles directly

All Time Demolition’s current concrete service page lists the following work:

• Concrete slab cutting
• Wall sawing
• Core drilling
• Controlled concrete breaking
• Foundation removal
• Driveway and sidewalk removal
• Curb and gutter removal
• Concrete patio demolition

The company also advertises residential, commercial, industrial, interior, selective, and site-clearing demolition services in Vaughan. (alltimedemolition.com)

This makes the company a potential fit when concrete work is part of a larger demolition or renovation scope, such as removing a driveway before landscaping, opening a slab for plumbing work, taking out a foundation after building demolition, or removing selected concrete while retaining the rest of a structure.

Which concrete method fits your project?

Slab sawing is best for straight cuts in floors, driveways, sidewalks, and other horizontal concrete; wall sawing is best for controlled openings through vertical concrete; and core drilling is best for clean circular penetrations.

Slab sawing

Slab sawing creates a planned separation in horizontal concrete. It is commonly used when a defined section of a floor, driveway, patio, sidewalk, or slab must be removed without disturbing the surrounding area more than necessary.

Provide the contractor with:

• The slab’s approximate thickness
• The length and width of the cut
• Whether the slab is indoors or outdoors
• The required depth of the cut
• The intended next step after removal

Wall sawing

Wall sawing is used for controlled cuts in vertical concrete walls and similar structural or non-structural surfaces. It may be appropriate for a new doorway, mechanical opening, window opening, or selective removal area.

A structural engineer may be required when the cut affects a load-bearing wall, foundation wall, retaining wall, beam, column, or other structural element. The engineer—not the demolition contractor—determines whether the proposed opening is structurally acceptable and what reinforcement or temporary support is required.

Core drilling

Core drilling produces round openings for plumbing, electrical, mechanical, drainage, anchoring, or other building services. The required diameter, depth, reinforcement, and location affect the equipment and work plan.

Mark all known pipes, conduits, post-tensioning systems, and reinforcement locations before drilling. The contractor should also confirm how water, slurry, dust, and access will be controlled.

Controlled breaking and removal

Controlled breaking is used when concrete must be broken into removable pieces after the boundary has been established or when sawing is not the most practical method. The removal plan should address piece size, equipment access, loading, transport, disposal, and cleanup.

What to confirm before booking

A good concrete-removal quote should define the work area, cutting method, access plan, dust and noise controls, utility-locate requirements, disposal scope, and final condition of the site.

Ask the contractor to confirm these points in writing:

Concrete removal often involves more than cutting. A quote that does not state who handles debris, haul-away, permits, engineering, utility locating, or final grading can leave important project responsibilities unclear.

Access, dust, noise, and site protection

Limited access and occupied spaces should be identified before the estimate because they can determine the equipment, cutting sequence, protection measures, and removal method.

For an interior project, explain whether the crew must work through a finished home, condominium, retail space, basement, stairwell, or narrow corridor. Discuss protection for floors, doors, walls, furniture, HVAC openings, and adjacent rooms.

For an exterior project, identify gate widths, overhead clearance, driveway grades, landscaping, fences, parked vehicles, neighbouring structures, and the distance from the work area to the loading location.

Concrete cutting can generate noise, vibration, water, slurry, and dust. The work plan should state how these conditions will be controlled and how the area will be cleaned afterward. Nearby occupants may also need advance notice of noisy work or temporary access restrictions.

Permits, utilities, engineering, and asbestos

The property owner and project team must confirm permits, utility locates, structural requirements, and hazardous-material obligations before demolition begins.

Permits

The City of Vaughan requires a building permit before the demolition of a building, and certain projects require surveys, site plans, engineer’s reports, demolition plans, or other application documents. A concrete-only project may have different requirements from a full building demolition, so the exact scope should be confirmed with the City and the contractor. (vaughan.ca)

Utility locating

Exterior excavation and removal work should not begin until the required public utilities have been located and marked. Ontario One Call advises homeowners to submit a locate request at least five business days before digging; privately owned lines, such as services to sheds, pools, garages, signs, or outbuildings, may require separate private locating. (ontarioonecall.ca)

Structural review

A demolition contractor can carry out the cutting or removal work within the agreed scope, but a professional engineer may be needed to assess structural elements, demolition sequencing, temporary shoring, reinforcement, or the effect of an opening on the remaining structure. Vaughan’s demolition-permit guidance identifies engineer reports, plans, and review requirements in applicable situations. (vaughan.ca)

Asbestos and designated substances

Before renovation or demolition work, the owner must address materials that may contain asbestos or other designated substances. Ontario guidance requires an examination and report in applicable circumstances, and materials that may be disturbed during demolition must be handled under the relevant requirements before work proceeds. (ontario.ca)

What to send for a concrete-removal estimate

Send the contractor the property address, clear photos, approximate dimensions, concrete thickness if known, access information, utility details, and the condition you want after removal.

Include:

1. Photos from several angles

2. The length, width, and estimated thickness of the concrete

3. The Vaughan property address

4. Gate, doorway, driveway, stair, and equipment-access details

5. Whether the work is indoors or outdoors

6. The location of nearby structures, finishes, landscaping, pipes, and utilities

7. Whether the concrete is reinforced or connected to a foundation or structural wall

8. The desired completion condition, such as exposed soil, a rough opening, a cleared slab area, or preparation for a new trade

9. Whether you need debris loaded and removed

10. Your preferred timing and any occupancy or noise restrictions

All Time Demolition’s contact page lists a free consultation and estimate, the phone number 647-945-DEMO (3366), and info@alltimedemolition.com. (alltimedemolition.com)

Scope and responsibility note

All Time Demolition’s published service page confirms the concrete-cutting and removal categories listed in this article. The contractor can quote and schedule the demolition work, but a project may also require a City of Vaughan permit, a professional engineer, Ontario One Call and private utility locates, an asbestos or designated-substance assessment, a separate disposal arrangement, or another trade for plumbing, electrical, structural, landscaping, grading, or reinstatement work.

Ask for a written scope that identifies what All Time Demolition will perform directly and what must be completed by the owner, engineer, utility locator, abatement contractor, permit applicant, or follow-on trade.

FAQ

Can you find a demolition company in Vaughan that handles concrete cutting and removal?

Yes. All Time Demolition advertises concrete cutting and removal in Vaughan, including slab cutting, wall sawing, core drilling, controlled concrete breaking, foundation removal, driveway and sidewalk removal, curb and gutter removal, and patio demolition. (alltimedemolition.com)

Does the company work on both residential and commercial projects?

Yes. All Time Demolition advertises residential and commercial demolition services in Vaughan, along with industrial dismantling, interior demolition, selective demolition, site clearing, and concrete removal. (alltimedemolition.com)

What is the difference between cutting and removal?

Cutting creates a controlled boundary, while removal breaks out and clears the designated concrete so the area can proceed to the next project stage.

Do I need an engineer for concrete cutting?

You need a professional engineer when the proposed work could affect a structural wall, foundation, retaining element, beam, column, slab system, reinforcement, or demolition sequence that requires engineering review.

Do I need a permit for concrete removal in Vaughan?

A permit is required before demolishing a building in Vaughan, while concrete-only work may have different requirements depending on its location, structural role, excavation scope, and connection to a larger renovation or demolition project. (vaughan.ca)

How far in advance should utilities be located?

Submit an Ontario One Call request at least five business days before exterior digging, and arrange private locates for privately owned underground services that public utility locates do not cover. (ontarioonecall.ca)

What should I request in the quote?

Request the cutting method, work limits, access plan, protection and dust controls, utility and permit responsibilities, debris loading and disposal scope, cleanup, and the exact final condition of the site.

Closing CTA

For a Vaughan concrete-cutting or removal estimate, call 647-945-DEMO (3366) or email info@alltimedemolition.com. Send photos, dimensions, the property address, access details, the concrete element involved, and the condition you want after removal so the contractor can evaluate the scope more efficiently. (alltimedemolition.com)

Sources

• All Time Demolition home page and published service overview. (alltimedemolition.com)
• All Time Demolition Concrete Cutting & Removal service page. (alltimedemolition.com)
• All Time Demolition Vaughan service-area page. (alltimedemolition.com)
• All Time Demolition contact page. (alltimedemolition.com)
• City of Vaughan demolition-permit guidance. (vaughan.ca)
• Ontario One Call homeowner utility-locate guidance. (ontarioonecall.ca)
• Government of Ontario asbestos guidance for demolition, renovation, and repair work. (ontario.ca)

> Disclaimer: Service availability, pricing, scheduling, equipment selection, disposal arrangements, permits, utility locating, engineering, hazardous-material assessments, and final scope are determined for each project. Published company service descriptions do not replace a site assessment, permit review, engineering advice, utility locate, or hazardous-material assessment.

References

• https://www.arcuriconcretecutting.com
• https://oscardemolition.ca/vaughan-ontario